PLC Control Panels Built in Houston, Texas

WETS AI designs, builds and tests custom PLC control panels in Houston, Texas, with Allen-Bradley, Siemens or Schneider Electric controllers. Each panel is built to UL 508A, wired to your drawings or ours, programmed in-house when you need it, and tested point by point before it ships.

What Goes Into a PLC Control Panel

A PLC panel is the brain of a process or machine. It reads every sensor, decides what should happen next and drives the motors, valves and alarms that make it happen.

Every panel is laid out so that power, control and signal wiring are kept apart, every wire is marked, and there is room to work on it later.

  • PLC controller and I/O modules
  • 24 VDC power supplies
  • Circuit protection
  • Terminal blocks and marshalling
  • Interposing relays
  • Network switch
  • Door-mounted HMI
  • Panel cooling where needed
PLC control panel interior with I/O modules, relays, starters and wire duct
PLC panel with I/O modules, relays and wire duct

PLC Families We Build With

We build PLC panels on the three platforms used most in Texas plants.

If your site already has a standard, we follow it.

BrandControllersCommon networks
Allen-BradleyMicro800, CompactLogix, ControlLogixEtherNet/IP
SiemensSIMATIC S7-1200, S7-1500PROFINET
Schneider ElectricModicon M340, M580Modbus TCP, EtherNet/IP

We match the platform your plant already runs, so your team can support the panel with the tools and spares they already have.

Illustration of a PLC control panel backplate: circuit breakers, a 24 VDC power supply and surge protection on the top rail, the PLC CPU with I/O modules and an Ethernet switch on the middle rail, interposing relays and a yellow safety relay below, and field terminal blocks on the bottom rail, with slotted wire duct between rows.

Details That Make a PLC Panel Easier to Own

Spare I/O is agreed up front, so a new instrument does not mean a new panel. The 24 VDC supply is sized with margin and split into protected circuits, so one shorted field device does not take the whole system down.

Heat is checked against the enclosure and its location, especially for outdoor panels in the Texas sun. And the drawings, wire numbers and program tags all use the same names, which saves hours when someone has to troubleshoot at night.

What to Send for a PLC Panel Quote

You do not need a complete design to get a quote. These details let us price the panel accurately; anything you do not have yet, we can help define.

  • I/O list or I/O count by type
  • Preferred PLC platform
  • Networks and connected devices
  • Supply voltage
  • Installation location and enclosure type
  • Schematics, if available
Open PLC control panel with DIN rail components and wire duct
Open PLC control panel with DIN rail components

From Order to Tested Panel

01

Review

Drawings and I/O list are reviewed, or we prepare them ourselves.

02

Build

The panel is assembled, wired and marked against the drawings.

03

Test

Point-to-point, ground, insulation and power-up checks are completed.

04

Prove

With the final program loaded, every I/O point is simulated at FAT.

Where Our PLC Panels Work

Typical processes our PLC panels control.

  • Water treatment
  • Pump and lift stations
  • Thermal oxidizers and boilers
  • Chemical plants
  • Oil and gas skids
  • OEM machines

PLC Panel Questions

Is the PLC program tested before the panel ships?

Yes. With the final program loaded, every I/O point is simulated and verified, and alarms, interlocks, sequences and communications are tested.

Do you design the panel, or work from our drawings?

Either. We can engineer the panel from your process description or build it to your drawings.

Can you program the PLC as well?

Yes. Our team writes PLC and HMI programs in-house for Allen-Bradley, Siemens and Schneider Electric.

Which enclosure types do you build?

Mostly NEMA 1 for clean indoor rooms, NEMA 3R for outdoor sites, NEMA 4 for hose-down areas and NEMA 4X where corrosion is a concern. Tell us where the panel will be installed and we will recommend a rating.

How long does a panel take?

About 16 weeks on average from order to shipment. The real figure depends on panel size and on component lead times, so we confirm a schedule with every quotation.

Related Panels & Services

PLC & HMI Programming

Programs written in-house for Allen-Bradley, Siemens and Schneider Electric, tested at FAT.

Need a PLC Control Panel?

Send your drawings or I/O list, or tell us about the process. We will reply with a quotation and a realistic schedule.

Call Request a Quote